Description
Semi-Adjustable Tyne Mounted Assembly – Flat-On – Slimline Agrihub
15in 70mm Vee Solid
Semi-Adjustable Tyne Mounted Assembly – Flat-On 15 inch 70mm Vee Solid Tyre – Slimline Agrihub version
Assembly – Semi-Adjustable Tyne Mounted Press Wheels are most widely used where there is a need to put the press wheel right in behind the tyne and where space limitations do not allow for any other mounting method. The popularity of these units is due to the fact that they give a cost effective means getting the press wheel in close behind the tyne. The semi-adjustable variant allows a variety of methods of adjusting pressure and wheel position, making them suitable for a wider number of tyne varieties. The semi-adjustable unit also comes standard with a longer and wider throat to allow for double shooting with oversize tubes. All units come standard configured as a swivel unit. The units can be configured for low pressure (15kg) or high pressure (40kg), however most units are run at an average pressure of around 20 kg. A choice of 15, 16 or 18 inch wheel sizes is available with a large number of tyre options, most units are sold with 15 inch wheels. This unit is fitted with zero maintenance agrihubs. Caution needs to be exercised when using tyne mounts as they are not suitable on some machines and in some conditions. The tyne design, breakout and sowing conditions are all important considerations. To determine whether your machine and conditions are suitable please contact Manutec to discuss.
Tyre – 70mm wide mid range vee (egg) shape solid tyre. This tyre is a medium to high pressure tyre suited to dry abrasive and hard conditions. Tyre will give good average results across a range of soil and climatic conditions. Tyre is good for moisture seeking and seed pressing in most conditions. Tyre has a tendency to leave paddocks rough, which is a necessity of the moisture channelling. This tyre is well suited to most seeding methods, points and boots. Not recommended in very sticky soils.
In the more information section below is a Tyre Information and selection pdf.
When measuring tyres we use the outside diameter of the tyre, so when we refer to this as a 15 inch tyre it means that the outside diameter of the tyre is approximately 15 inches
Class Name | Value |
---|---|
No. of Wheels | 1 |
Weight | 18.00KG |
Environment 2 | ROCK |
Environment 3 | ABRASIVE SOIL |
Mounting Method | UBOLT TO BACK OF TYNE |
Environment 1 | DRY SOWING |
Tyre | 15 INCH 70MM VEE SOLID |
PDF Downloads
https://ag.manutec.com.au/wp-content/uploads/2024/10/Press-wheels-info-sheet.pdf
Reviews
There are no reviews yet.