Twin Walking Wheel Assembly Complete with 15 inch 150mm Wedge Semi-Solid Tyres – Slimline Agri Hub Version

Description

Twin Walking Wheel Assembly -SLIMLINE AGRIHUB

Complete with 15 INCH 150WGSS Tyres on Wheels

Twin Walking Wheel Assembly Complete with 15 inch 150mm Wedge Semi-Solid Tyres – Slimline Agri Hub Version

Twin Walking Wheels Complete with 15 inch 150mm Wedge Solid Tyres – Slimline Agri Hub version

Slimline Agri-Hub Variant – Assembly – Twin and Single Walking Wheels are a very popular method of adding a press wheel capability to either a new or an existing bar. The popularity of these units is due to there cost effectiveness, strength to weight ratio, simplicity of design, ease of maintenance and the fact that the design has been tested, proven and improved for over 20 years. The walking beam design ensures that the unit is capable of clearing most obstacles without damage and whilst maintaining a relatively even pressure on the paired wheel. The twins are capable of being configured as standard for between 6 inch and 13 inch row spacings. On request these spacings can be extended out beyond 13 inches. All units come standard configured as a swivel or following unit, if no swivel is desireable then a simple kit is applied to lock out the swivel. This ensures that the unit can be easily reconfigured as a swivel unit at a later date. The units can be configured for low pressure (15kg) or high pressure (40kg), however most units are run at an average pressure of between 20 and 25kg. A choice of 15, 16 or 18 inch wheel sizes is available with a large number of tyre options. Units come standard with high quality zero maintenance Agri-Hubs on the wheels, these are fully sealed unit, that comes fully assembled and is repair by replacement. A range of other accessories are available to augment performance in some marginal conditions.

Tyre – 150mm wide wedge semi-solid tyre. This tyre is a medium to low pressure tyre suited to medium rough and highly abrasive conditions. This is a specialised tyre with flat wings on the extremities of the tyre to assist with forming the outer edges of the furrow.  The wedge part of the tyre is 4″ in width. Tyre will give good average results across a range of soil and climatic conditions, however it will work best sandy conditions. Tyre is good for moisture seeking and seed pressing in most conditions. This tyre is well suited to most seeding methods, points and boots, however it is most widely used for spread or split row seeding out to 4 inch. This tyre will also reduce the impact of sidewall collaps in light and sandy soils. Recommended for very abrasive soils or rough conditions.

PDF Downloads

https://ag.manutec.com.au/wp-content/uploads/2024/10/Press-wheels-info-sheet.pdf