Gang 7.2 inch Spacing – 6 Wheel 18 inch 100mm Flat Ribbed Solid Tyre

Description

Gang 7.2in Spacing – 6 Wheel

18in 100mm Flat Ribbed Solid

Gang 7.2 inch Spacing – 6 Wheel 18 inch 100mm Flat Ribbed Solid Tyre

Assembly – The Gang Press Wheel Assembly is a tried and tested means of fitting press wheels to the rear of the bar. The modern gang comes in to its own due to its versatility in being able to be quickly attached or released to the rear of a bar. Many machines already have harrows in some form fitted and for those owners wanting the versatility of press wheels or harrows or nothing in a quick detach unit, then gangs are a good option. Gangs are available in a range of standard spacings and sizes, or can be tailored to an individual set up if required. Manutec Gangs come standard with 18 inch nylon bush press wheels running on shaft pillow blocks. Any of the tyres from Manutecs 18 inch range can be selected however we normally recommend the 3 inch and above profiles in the semi-solid or solid materials, unless the customer has specific needs dictating narrower or softer tyres.

Tyre – 100mm wide flat solid tyre with a 1 inch square rib in the centre. This tyre is a low outer pressure, medium high inner pressure tyre suited to dry conditions. Tyre will give an even pressure footprint over the 100mm of tyre face and a region of high pressure over the centre channel where the seed is. Tyre has a tendency to bring soil back over the seed (desireable in most areas). Recommended for very abrasive soils or rough conditions. Not recommended in sticky conditions as build up will occur and the benefit of the central rib will be lost.

PDF Downloads

https://ag.manutec.com.au/wp-content/uploads/2024/10/Press-wheels-info-sheet.pdf