Description
Twin Walking Wheel Assembly
Complete with 100FLSD Tyres on Wheels
Twin Walking Wheel Assembly Complete with 100mm Flat Solid Tyres on Wheels
Assembly – Twin Walking Wheels are a very popular method of adding a press wheel capability to either a new or an existing bar. The popularity of these units is due to there cost effectiveness, strength to weight ratio, simplicity of design, ease of maintenance and the fact that the design has been tested, proven and improved for over 20 years. The walking beam design ensures that the unit is capable of clearing most obstacles without damage and whilst maintaining a relatively even pressure on the paired wheel. The twins are capable of being configured as standard for between 6 inch and 13 inch row spacings. On request these spacings can be extended out beyond 13 inches. All units come standard configured as a swivel or following unit, if no swivel is desireable then a simple kit is applied to lock out the swivel. This ensures that the unit can be easily reconfigured as a swivel unit at a later date. The units can be configured for low pressure (15kg) or high pressure (40kg), however most units are run at an average pressure of between 20 and 25kg. A choice of 15, 16 or 18 inch wheel sizes is available with a large number of tyre options. Units come standard with Integral Hub Press Wheels fitted with greaseable LM Tapered Bearings and Marine Seal. Cast Holden Hubs are available as an option on request. A range of other accessories are available to augment performance in some marginal conditions.
Tyre – 100mm wide flat solid tyre. This tyre is a low pressure tyre suited to dry conditions. Tyre will give an even pressure footprint over the 100mm of tyre face. Tyre has a tendency to bring soil back over the seed (desireable in most areas). This tyre is well suited to split or spread row seeding in either high abrasion or rough conditions. Recommended for very abrasive soils or rough conditions. Not recommended in highly sticky conditions as build up will occur.
| Class Name | Value |
|---|---|
| No. of Wheels | 2 (IH) |
| Weight | . |
| Environment 2 | Highly Abrasive Soil |
| Environment 3 | Dry Sowing |
| Mounting Method | Rear Bar 3 or 4 Inch |
| Environment 1 | Rock/Stony |
| Tyre | 18 Inch 100mm Flat Solid |
PDF Downloads
https://ag.manutec.com.au/wp-content/uploads/2024/10/Press-wheels-info-sheet.pdf
https://ag.manutec.com.au/wp-content/uploads/2024/10/AGWALKINGWHEEL2011.pdf
Reviews
There are no reviews yet.