Description
16 IN Alu Press Wheel – HT/Ford Hub – No Hub or Stub
Complete with 120PRSS Tyre on Wheel
16 inch Aluminium Press Wheel – HT/Ford Hub – No Hub or Stub Complete with 120PRSS (PAIRED ROW) Tyre on Wheel
Tyre – 120mm wide flat semi-solid tyre with a raised centre area for moisture channelling during paired row seeding. This tyre is a low pressure tyre suited to wet and mildly sticky conditions. Tyre will give an even pressure footprint over the 120mm of tyre face, plus provide a slightly higher pressure zone in the middle of the profile to provide some moisture channelling. This tyre is specifically designed for use on Morris C1/C2, Seed Hawke, Flexi-Coil PD5700 and Bourgault 3320/3420 precision air seeders as a replacement for existing flat tyres.
Another advantage of the Manutec wheels over the original equipment is that our wheels have a split rim with interchangeable tyres.
Not recommended in very sticky soils (see SP variant of this tyre)
This tyre has a high sidewall to reduce rooster tailing.
| Class Name | Value |
|---|---|
| Bearings/Seals | USE HT OR FORD PATTERN |
| Environment 3 | USE WITH PAIRED ROW BOOTS |
| Tyre Width | 120MM |
| Centre Material | ALUM ALLOY |
| Environment 1 | DRY SOWING |
| Diameter (Tyre) | 410MM (16″) |
| Tyre Material | SEMI SOLID RUBBER |
| Tyre Shape | PAIRED ROW DESIGN |
| Axle | NO AXLE |
| Environment 2 | ABRASIVE SOIL |
| Weight | 13.50KG |
PDF Downloads
https://ag.manutec.com.au/wp-content/uploads/2024/10/Press-wheels-info-sheet.pdf
Reviews
There are no reviews yet.