Single Walking Wheel Assembly – Slimline Agrihub Complete with 55mm Wedge Semi-Pneumatic Tyre on Wheel

Description

Single Walking Wheel Assembly – SLIMLINE AGRIHUB

Complete with 55WGSP Tyre on Wheel

Single Walking Wheel Assembly – Slimline Agrihub Complete with 55mm Wedge Semi-Pneumatic Tyre on Wheel

Slimline Agri-Hub Variant – Assembly – Twin and Single Walking Wheels are a very popular method of adding a press wheel capability to either a new or an existing bar. The popularity of these units is due to there cost effectiveness, strength to weight ratio, simplicity of design, ease of maintenance and the fact that the design has been tested, proven and improved for over 20 years. The walking beam design ensures that the unit is capable of clearing most obstacles without damage and whilst maintaining a relatively even pressure on the paired wheel. The twins are capable of being configured as standard for between 6 inch and 13 inch row spacings. On request these spacings can be extended out beyond 13 inches. All units come standard configured as a swivel or following unit, if no swivel is desireable then a simple kit is applied to lock out the swivel. This ensures that the unit can be easily reconfigured as a swivel unit at a later date. The units can be configured for low pressure (15kg) or high pressure (40kg), however most units are run at an average pressure of between 20 and 25kg. A choice of 15, 16 or 18 inch wheel sizes is available with a large number of tyre options. Units come standard with high quality zero maintenance Agri-Hubs on the wheels, these are fully sealed unit, that comes fully assembled and is repair by replacement. A range of other accessories are available to augment performance in some marginal conditions.

The new model walking wheels have a fully cast walking beam with side ribs to reduce bending and the vertical swivel yoke is also cast to prevent breakages.

A range of toolbar accessories are also available to assist with fitting a false toolbar if required.

For all Manutec products we carry a full range of spare parts for every component used in all of our products.

Tyre – 55mm wide narrow wedge semi-pneumatic tyre. This tyre is a high pressure tyre suited to wet and sticky conditions. Tyre will give good results across a range of soil and climatic conditions. Tyre is good for moisture seeking behind very narrow points in firm soil structures. Tyre has a tendency to leave paddocks rough, which is a necessity of the moisture channelling. Not recommended in rough or very abrasive soils (see solid variants of this tyre) as this is quite a soft tyre. Not recommended for use in sandy soils as too much soil may come back in over the seed.

For a press wheel tyres fact sheet, scroll down to More Information and click on Press Wheels Info Sheet and a pdf containing detailed information on press wheel tyre selection will be downloaded.

PDF Downloads

https://ag.manutec.com.au/wp-content/uploads/2024/10/Press-wheels-info-sheet.pdf