Single Walking Wheel Assembly – Slimline Agrihub Complete with 55mm Wedge Solid Tyre on Wheel

Description

Single Walking Wheel Assembly – SLIMLINE AGRIHUB

Complete with 18 inch 55WGSD Tyre on Wheel

Single Walking Wheel Assembly – Slimline Agrihub Complete with 55mm Wedge Solid Tyre on Wheel

Slimline Agri-Hub Variant – Assembly – Twin and Single Walking Wheels are a very popular method of adding a press wheel capability to either a new or an existing bar. The popularity of these units is due to there cost effectiveness, strength to weight ratio, simplicity of design, ease of maintenance and the fact that the design has been tested, proven and improved for over 20 years. The walking beam design ensures that the unit is capable of clearing most obstacles without damage and whilst maintaining a relatively even pressure on the paired wheel. The twins are capable of being configured as standard for between 6 inch and 13 inch row spacings. On request these spacings can be extended out beyond 13 inches. All units come standard configured as a swivel or following unit, if no swivel is desireable then a simple kit is applied to lock out the swivel. This ensures that the unit can be easily reconfigured as a swivel unit at a later date. The units can be configured for low pressure (15kg) or high pressure (40kg), however most units are run at an average pressure of between 20 and 25kg. A choice of 15, 16 or 18 inch wheel sizes is available with a large number of tyre options. Units come standard with high quality zero maintenance Agri-Hubs on the wheels, these are fully sealed unit, that comes fully assembled and is repair by replacement. A range of other accessories are available to augment performance in some marginal conditions.

Tyre – 55mm wide narrow wedge solid tyre. This tyre is a medium/high pressure tyre suited to rough and abrasive conditions. Tyre will give good results across a range of soil and climatic conditions. Tyre is good for moisture seeking behind very narrow points in firm soil structures. Tyre has a tendency to leave paddocks rough, which is a necessity of the moisture channelling. Not recommended in heavy sticky soild (see semi-pneumatic variants of this tyre) as this is a very hard tyre and will build up. Not recommended for use in sandy soils as too much soil may come back in over the seed.

PDF Downloads

https://ag.manutec.com.au/wp-content/uploads/2024/10/Press-wheels-info-sheet.pdf