Heavy Duty Single Rear Mounted Swivel Assembly 15 inch 55mm Wedge Solid Tyre – Slimline Agrihub

Description

Heavy Duty Single Rear Mounted Swivel Assembly

15in 55mm Wedge Solid – Slimline Agrihub

Heavy Duty Single Rear Mounted Swivel Assembly 15 inch 55mm Wedge Solid Tyre – Slimline Agrihub

Assembly – Rear Mount Assemblies are a popular method of adding a rear mounted swivel press wheel capability to either a new or an existing bar with wide spacings (15 inch and greater). The popularity of these units is due to the independant nature of each assembly, strength to weight ratio, simplicity of design and ease of maintenance. The single swivel arm design ensures that the unit is capable of clearing most obstacles and that a very even pressure is maintained across the width of the machine. Generally 15 inch or 16 inch inch wheel sizes are used with this assembly and a large number of tyre options is available to suit. Units come standard with zero maintenance slimline agrihub. A range of other accessories are available to augment performance in some marginal conditions. A low tool bar will require to be fitted to the rear of the machine to mount these press wheels.

Tyre – 55mm wide narrow wedge solid tyre. This tyre is a medium/high pressure tyre suited to rough and abrasive conditions. Tyre will give good results across a range of soil and climatic conditions. Tyre is good for moisture seeking behind very narrow points in firm soil structures. Tyre has a tendency to leave paddocks rough, which is a necessity of the moisture channelling. Not recommended in heavy sticky soild (see semi-pneumatic variants of this tyre) as this is a very hard tyre and will build up. Not recommended for use in sandy soils as too much soil may come back in over the seed.

PDF Downloads

https://ag.manutec.com.au/wp-content/uploads/2024/10/Press-wheels-info-sheet.pdf