Description
Semi-Adjustable Tyne Mounted Assembly – Edge-On – Slimline Agrihub
15in 55mm Wedge Solid
Semi-Adjustable Tyne Mounted Assembly – Edge-On 15 inch 55mm Wedge Solid Tyre – Slimline Agrihub version
Assembly – Semi-Adjustable Tyne Mounted Press Wheels are most widely used where there is a need to put the press wheel right in behind the tyne and where space limitations do not allow for any other mounting method. The popularity of these units is due to the fact that they give a cost effective means getting the press wheel in close behind the tyne. The semi-adjustable variant allows a variety of methods of adjusting pressure and wheel position, making them suitable for a wider number of tyne varieties. The semi-adjustable unit also comes standard with a longer and wider throat to allow for double shooting with oversize tubes. All units come standard configured as a swivel unit. The units can be configured for low pressure (15kg) or high pressure (40kg), however most units are run at an average pressure of around 20 kg. A choice of 15, 16 or 18 inch wheel sizes is available with a large number of tyre options, most units are sold with 15 inch wheels. This unit is fitted with zero maintenance agrihubs. Caution needs to be exercised when using tyne mounts as they are not suitable on some machines and in some conditions. The tyne design, breakout and sowing conditions are all important considerations. To determine whether your machine and conditions are suitable please contact Manutec to discuss.
Tyre – 55mm wide narrow wedge solid tyre. This tyre is a medium/high pressure tyre suited to rough and abrasive conditions. Tyre will give good results across a range of soil and climatic conditions. Tyre is good for moisture seeking behind very narrow points in firm soil structures. Tyre has a tendency to leave paddocks rough, which is a necessity of the moisture channelling. Not recommended in heavy sticky soild (see semi-pneumatic variants of this tyre) as this is a very hard tyre and will build up. Not recommended for use in sandy soils as too much soil may come back in over the seed.
In the more information section below is a Tyre Information and selection pdf.
When measuring tyres we use the outside diameter of the tyre, so when we refer to this as a 15 inch tyre it means that the outside diameter of the tyre is approximately 15 inches
Class Name | Value |
---|---|
No. of Wheels | 1 |
Weight | 21.00KG |
Environment 2 | DEEP SEEDING |
Environment 3 | ROCK, ABRASIVE SOIL |
Mounting Method | EDGE ON BRACKET TO BACK OF TYNE |
Environment 1 | DRY SOWING |
Tyre | 15 INCH 55MM WEDGE SOLID |
PDF Downloads
https://ag.manutec.com.au/wp-content/uploads/2024/10/Press-wheels-info-sheet.pdf
Reviews
There are no reviews yet.