Fixed Tyne Mounted Assembly Complete with 15 inch 55mm Wedge Semi Pneumatic Tyre – Slimline Agrihub

Description

Fixed Tyne Mounted Assembly

C/W 15 Inch 55WGSP Wedge Semi Pneumatic Tyre, Slimline Agri Hub

Fixed Tyne Mounted Assembly Complete with 15 inch 55mm Wedge Semi Pneumatic Tyre – Slimline Agrihub

Assembly – Fixed Tyne Mounted Press Wheels are most widely used where there is a need to put the press wheel right in behind the tyne and where space limitations do not allow for any other mounting method. The popularity of these units is due to the fact that they give the most cost effective means getting the press wheel in close behind the tyne. The Fixed variant is the most simple and only allows pressure adjustment be sliding the bracket up and down the tyne. All units come standard configured as a swivel unit. The units can be configured for low pressure (15kg) or high pressure (40kg), however most units are run at an average pressure of around 20 kg. A choice of 15, 16 or 18 inch wheel sizes is available with a large number of tyre options, most units are sold with 15 inch wheels. Units come standard with Slimline Zero Maintenance Agrihub. Caution needs to be exercised when using tyne mounts as they are not suitable on some machines and in some conditions. The tyne design, breakout and sowing conditions are all important considerations. To determine whether your machine and conditions are suitable please contact Manutec to discuss.

Tyre – 55mm wide narrow wedge semi-pneumatic tyre. This tyre is a high pressure tyre suited to wet and sticky conditions. Tyre will give good results across a range of soil and climatic conditions. Tyre is good for moisture seeking behind very narrow points in firm soil structures. Tyre has a tendency to leave paddocks rough, which is a necessity of the moisture channelling. Not recommended in rough or very abrasive soils (see solid variants of this tyre) as this is quite a soft tyre. Not recommended for use in sandy soils as too much soil may come back in over the seed.

In the more information section below is a Tyre Information and selection pdf.

When measuring tyres we use the outside diameter of the tyre, so when we refer to this as a 15 inch tyre it means that the outside diameter of the tyre is approximately 15 inches.

PDF Downloads

https://ag.manutec.com.au/wp-content/uploads/2024/10/Press-wheels-info-sheet.pdf