Description

Fixed Tyne Mounted Assembly

C/W 15 Inch 80WGSD Solid WedgeTyre, Slimline Agri Hub

Fixed Tyne Mounted Assembly Complete with 15 inch 80mm Wedge Solid Tyre – Slimline Agrihub

Assembly – Fixed Tyne Mounted Press Wheels are most widely used where there is a need to put the press wheel right in behind the tyne and where space limitations do not allow for any other mounting method. The popularity of these units is due to the fact that they give the most cost effective means getting the press wheel in close behind the tyne. The Fixed variant is the most simple and only allows pressure adjustment be sliding the bracket up and down the tyne. All units come standard configured as a swivel unit. The units can be configured for low pressure (15kg) or high pressure (40kg), however most units are run at an average pressure of around 20 kg. A choice of 15, 16 or 18 inch wheel sizes is available with a large number of tyre options, most units are sold with 15 inch wheels. Units come standard with Slimline Zero Maintenance Agrihub. Caution needs to be exercised when using tyne mounts as they are not suitable on some machines and in some conditions. The tyne design, breakout and sowing conditions are all important considerations. To determine whether your machine and conditions are suitable please contact Manutec to discuss.

Tyre – 80mm wide mid range wedge solid tyre. This tyre is a high pressure tyre suited to rough and highly abrasive conditions where cleanability is not an issue. Tyre will give good average results across a range of soil and climatic conditions, although this tyre will build up in sticky soil as it has no ability to self clean. Tyre is good for moisture seeking and seed pressing in most conditions. Tyre has a tendency to leave paddocks rough, which is a necessity of the moisture channelling. This tyre is well suited to most seeding methods, points and boots. Recommended for very abrasive soils or very rough conditions.  Also available in a semi-solid and semi-pneumatic variant.

PDF Downloads

https://ag.manutec.com.au/wp-content/uploads/2024/10/Press-wheels-info-sheet.pdf