Single Walking Wheel Assembly SLIMLINE -AGRIHUB Complete with 55mm Flat Semi-Pneumatic Tyre on Wheel

Description

Single Walking Wheel Assembly – SLIMLINE AGRIHUB

Complete with 55FLSP Tyre on Wheel

Single Walking Wheel Assembly SLIMLINE -AGRIHUB Complete with 55mm Flat Semi-Pneumatic Tyre on Wheel

Slimline Agri-Hub Variant – Assembly – Twin and Single Walking Wheels are a very popular method of adding a press wheel capability to either a new or an existing bar. The popularity of these units is due to there cost effectiveness, strength to weight ratio, simplicity of design, ease of maintenance and the fact that the design has been tested, proven and improved for over 20 years. The walking beam design ensures that the unit is capable of clearing most obstacles without damage and whilst maintaining a relatively even pressure on the paired wheel. The twins are capable of being configured as standard for between 6 inch and 13 inch row spacings. On request these spacings can be extended out beyond 13 inches. All units come standard configured as a swivel or following unit, if no swivel is desireable then a simple kit is applied to lock out the swivel. This ensures that the unit can be easily reconfigured as a swivel unit at a later date. The units can be configured for low pressure (15kg) or high pressure (40kg), however most units are run at an average pressure of between 20 and 25kg. A choice of 15, 16 or 18 inch wheel sizes is available with a large number of tyre options. Units come standard with high quality zero maintenance Agri-Hubs on the wheels, these are fully sealed unit, that comes fully assembled and is repair by replacement. A range of other accessories are available to augment performance in some marginal conditions.

The new model walking wheels have a fully cast walking beam with side ribs to reduce bending and the vertical swivel yoke is also cast to prevent breakages.

A range of toolbar accessories are also available to assist with fitting a false toolbar if required.

For all Manutec products we carry a full range of spare parts for every component used in all of our products.

Tyre – 55mm wide flat semi-pneumatic tyre. This tyre is a low to medium pressure tyre suited to wet and sticky conditions. Tyre will give an even pressure footprint over the 55mm of tyre face. Tyre has a tendency to bring soil back over the seed (desireable in most areas). This tyre is well suited to sticky conditions as it has a very good level of cleanability. Not recommended in very rough or very abrasive soils (see solid variant of this tyre)

For a press wheel tyres fact sheet, scroll down to More Information and click on Press Wheels Info Sheet and a pdf containing detailed information on press wheel tyre selection will be downloaded.

PDF Downloads

https://ag.manutec.com.au/wp-content/uploads/2024/10/Press-wheels-info-sheet.pdf