Description

Fixed Tyne Mounted Assembly

C/W 15 Inch 55WGSD Solid WedgeTyre, Slimline Agri Hub

Fixed Tyne Mounted Assembly Complete with 15 inch 55mm Wedge Solid Tyre – Slimline Agrihub

Assembly – Fixed Tyne Mounted Press Wheels are most widely used where there is a need to put the press wheel right in behind the tyne and where space limitations do not allow for any other mounting method. The popularity of these units is due to the fact that they give the most cost effective means getting the press wheel in close behind the tyne. The Fixed variant is the most simple and only allows pressure adjustment be sliding the bracket up and down the tyne. All units come standard configured as a swivel unit. The units can be configured for low pressure (15kg) or high pressure (40kg), however most units are run at an average pressure of around 20 kg. A choice of 15, 16 or 18 inch wheel sizes is available with a large number of tyre options, most units are sold with 15 inch wheels. Units come standard with Slimline Zero Maintenance Agrihub. Caution needs to be exercised when using tyne mounts as they are not suitable on some machines and in some conditions. The tyne design, breakout and sowing conditions are all important considerations. To determine whether your machine and conditions are suitable please contact Manutec to discuss.

Tyre – 55mm wide narrow wedge solid tyre. This tyre is a medium/high pressure tyre suited to rough and abrasive conditions. Tyre will give good results across a range of soil and climatic conditions. Tyre is good for moisture seeking behind very narrow points in firm soil structures. Tyre has a tendency to leave paddocks rough, which is a necessity of the moisture channelling. Not recommended in heavy sticky soild (see semi-pneumatic variants of this tyre) as this is a very hard tyre and will build up. Not recommended for use in sandy soils as too much soil may come back in over the seed.

PDF Downloads

https://ag.manutec.com.au/wp-content/uploads/2024/10/Press-wheels-info-sheet.pdf