Description

Gang 10in Spacing – 5 Wheel

18in 110mm Wedge Solid

Gang 10 inch Spacing – 5 Wheel 18 inch 110mm Flat Solid Tyre

Assembly – The Gang Press Wheel Assembly is a tried and tested means of fitting press wheels to the rear of the bar. The modern gang comes in to its own due to its versatility in being able to be quickly attached or released to the rear of a bar. Many machines already have harrows in some form fitted and for those owners wanting the versatility of press wheels or harrows or nothing in a quick detach unit, then gangs are a good option. Gangs are available in a range of standard spacings and sizes, or can be tailored to an individual set up if required. Manutec Gangs come standard with 18 inch nylon bush press wheels running on shaft pillow blocks. Any of the tyres from Manutecs 18 inch range can be selected however we normally recommend the 3 inch and above profiles in the semi-solid or solid materials, unless the customer has specific needs dictating narrower or softer tyres.

Tyre – 110mm wide wedge solid tyre. This tyre is a low pressure tyre suited to dry conditions. Tyre will give an even pressure footprint over the 110mm of tyre face.  This tyre is well suited to split or spread row seeding in either high abrasion or rough conditions. Recommended for very abrasive soils or rough conditions. Not recommended in highly sticky conditions as build up will occur.

PDF Downloads

https://ag.manutec.com.au/wp-content/uploads/2024/10/Press-wheels-info-sheet.pdf