In-Frame Swivel Assembly U3L2 Config 15 inch 80mm Wedge Semi-Pneumatic Tyre SLIMLINE AGRIHUB MODEL

$693.50

SKU: 15PWIFU3L280WGSP-SAH Category:

Description

In-Frame Swivel Assembly U3L2 Config

15in 80mm Wedge Semi-Pneumatic – Slimline AgriHub

In-Frame Swivel Assembly U3L2 Config 15 inch 80mm Wedge Semi-Pneumatic Tyre SLIMLINE AGRIHUB MODEL

Assembly – Inframe Press Wheels are most widely used where there is a need to put the press wheel right in behind the tyne. They are also a popular method of adding a rear mounted swivel press wheel capability to either a new or an existing bar where a seed boot capability is required in front of the press wheel. The popularity of these units is due to the fact that they give a cost effective means of either getting the press wheel in close behind the tyne without many of the unpleasant side affects normally associated with tyne mounts or parrallelograms. They are also popular for sowing small seed where the ability to sow off the press wheel gives much better depth control. The adjustable nature of the wheel and optional seed tube also provides a great deal of flexibility to seed placement and where the pressure can be applied. The single swivel arm design ensures that the unit is capable of clearing most obstacles and that a very even pressure is maintained across the width of the machine. All units come standard configured as a swivel or following unit, if no swivel is desireable then a simple kit is applied to lock out the swivel. This ensures that the unit can be easily reconfigured as a swivel unit at a later date. The units can be configured for low pressure (15kg) or high pressure (40kg), however most units are run at an average pressure of between 20 and 25kg. A choice of 15, 16 or 18 inch wheel sizes is available with a large number of tyre options. These units come standard Zero Maintenance Agri-Hub Press Wheels fitted. A range of other accessories including seed boots are available to augment performance in some marginal conditions.

Tyre – 80mm wide mid range wedge semi-pneumatic tyre. This tyre is a medium pressure tyre suited to wet and sticky conditions. Tyre will give good average results across a range of soil and climatic conditions. Tyre is good for moisture seeking and seed pressing in most conditions. Tyre has a tendency to leave paddocks rough, which is a necessity of the moisture channelling. This tyre is well suited to most seeding methods, points and boots. Not recommended in very rough or very abrasive soils (see semi solid or solid variants of this tyre)

Class Name Value
No. of Wheels ONE
Weight 34.57KG
Environment 2 MUD/CLAY/STICKY
Environment 3 NON ABRASIVE SAND-WET SOWING
Mounting Method IN FRAME BAR 3 OR 4 INCH
Environment 1 WET
Tyre 80MM WEDGE SEMI-PNEUMATIC

Additional information

Weight 34.57 kg
Dimensions 30 × 30 × 30 cm

Reviews

There are no reviews yet.

Be the first to review “In-Frame Swivel Assembly U3L2 Config 15 inch 80mm Wedge Semi-Pneumatic Tyre SLIMLINE AGRIHUB MODEL”

Your email address will not be published. Required fields are marked *